How to Oil Your Bat. Apply 2-3 teaspoons of oil to the face of the bat. You can use an old piece of rag but it doesn’t matter if you use your fingers. Make sure you don’t oil the splice, or within a CM of the splice. The oil should cover the face of the bat, the edges, the heel, and about 4 CM from the edges on the back of the bat.
Raw Linseed Oil. Can you over oil a cricket bat? It’s possible to over oil a bat. This makes the bat too moist and doesn’t provide the right “crack” off the willow. Most people agree that once a season (in between seasons) is the right time to oil your bat. You shouldn’t need to do it again until the next off-season.
More Cricket Bat Oil Bat images
You should treat your cricket bat using raw linseed oil because it keeps the bat moist longer than boiled linseed oil. This has two benefits for your cricket bat: It keeps the bat fibers bound together throughout the bat’s life. It increases the elasticity of the bat fibers, resulting in better performance and ping from the bat. What About Boiled Linseed Oil? Boiled linseed oil acts as a polish for the bat and gives it a varnish tint. However, the oil does not seep into the bat fibers ...
What Kind of Oil Do you Have to Use in Oiling Your Cricket Bat? Linseed oil is commonly used in furnishing furniture and so this applies to your cricket bats as well. Linseed oil is a kind of oil that contains the nutrients in keeping the cricket bat’s fibers intact and prevent them from drying out, causing cracks. Specifically, only raw linseed oil is usually used in oiling cricket bats, but linseed oil from the crafts store can work just the same and can still guarantee the same results ...
Cricket Bat Oil. The finest Raw Linseed Oil to protect your Cricket Bat. Applying Linseed oil to your bat is a personal preference. It seals the Cricket bat to prevent any moisture getting into or out of your cricket bat.
See more videos for Cricket Bat Oil Bat
The reason for this is so that the oil can gently soften the wood fibers on the face and edges of cricket bat. It is actually recommended with todays style of dried out cricket bats that you oil it 2 or 3 times each time leaving it for 24 hours before applying another coat or beginning with the knocking in process.
The most optimum oil to use for knocking in/breaking in a cricket bat is raw linseed oil as the properties of the oil tend to lock in the moisture content of the willow and impart a spring-like characteristic to the outer core of wood. This should be the characteristic you should be looking from the oil you use to knock in the bat.
The main reason you should oil your New Balance cricket bats is to soften the wooden fibers of the bat gently. That makes it ready for knocking and helps seal any moisture into the wood. That makes it ready for knocking and helps seal any moisture into the wood.